Allows the buyer to print up to 100 copies for home use only. Purchasers cannot distribute or sell the printed items and they cannot distribute or sell the digital design. If they wish to print more than 100 copies they must buy multiple licenses.
Shell thickness 1mm
Print Speed 60mm/s
1 Align the rectangular holes and bars on both wheels together.
2 Insert the 3 supporting bars into both aligned wheels.
1 Using a group of 3 rubber bands, insert halfway through the end hole of the 3D printed box and fold over. You should now have a total number of “6” rubber bands loops.
2 Place box between wheels.
3 Feed rubber bands through center hole of one wheel.
4 The rubber bands are held in place using a 3D printed tab. The tab lip should be facing towards the wheel to hold it in place.
5 Repeat process on the other wheel.
1 Place desired weights into box. Options include bolts, screws, nuts, etc. The more weight the better!
2 Cover the top of the box with tape to seal the weights in place.
Note: If the box is making contact with the support bars, you will need to add additional rubber bands.
Now roll on a flat surface and wait for it to return.